View G150X1-L01_4132234.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

do c no.: 14 0667 27 issu ed date: feb. 8, 2007 model no.: g150x 1-l 0 1 approv al 1 / 27 v e rsion 2.2 tft lcd approval s p ecification model no.: g150x1 ?l01 o?y u@ ?f?? |a ?2? 2007 -0 2-1 4 13:21:40 cs t approve by dept. mgr . (qa ra) tomy_ch en( 3?@ /52720/5 414 0 / 43150 ) de p a rtment mana ger(qa ra) accept 2007 -0 2-1 2 08:45:50 cs t approve by dir e cto r teren_lin( al2k /56910/3 606 4 ) dir e cto r accept c u s t o m e r : a p p r o v e d b y : note : for more informa tion: az displa ys, inc. 75 columbia, aliso viejo, ca 92656 http://www .azdispla ys.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 2 / 27 version 2.2 - contents - revision history ------------------------------------------------------- 3 1. general description ------------------ ------------------------------------- 4 1.1 overview 1.2 features 1.3 application 1.4 general specifications 1.5 mechanical specifications 2. absolute maximum ratings -- ------------ ------------ ------------ ----------------- 6 2.1 absolute ratings of environment 2.2 electrical absolute ratings 2.2.1 tft lcd module 2.2.2 backlight unit 3. electrical characteristics ------------------------------------------------------- 8 3.1 tft lcd module 3.2 backlight unit 4. block diagram ------------------------------------------------------- 11 4.1 tft lcd module 4.2 backlight unit 5. input terminal pin assignment ---------- ------------ ------------ ------------ --------- 12 5.1 tft lcd module 5.2 backlight unit 5.3 color data input assignment 6. interface timing ------------------------------------------------------- 15 6.1 input signal timing specifications 6.2 power on/off sequence 7. optical characteristics -- ----------------------------------------------------- 18 7.1 test conditions 7.2 optical specifications 8. precautions ------------------------------------------------------- 22 8.1 handling precautions 8.2 storage precautions 8.3 operation precautions 9. packaging ------------------------------------------------------- 23 9.1 packing specifications 9.2 packing method 10. definition of labels ---------------- --------------------------------------- 25 11. module drawing ------------------------------------------------------- 26 www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 3 / 27 version 2.2 revision history version date page (new) section description ver 2.0 ver 2.1 ver 2.2 may 23,? 06 jun 22,?06 feb 8,?07 all 4 6 7 6 all 1.2 2.1 2.2.2 2.1 approval specification was first issued. added rohs compliance added note 6 lamp current 8.5ma modify data format / delete rh-t diagram www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 4 / 27 version 2.2 1. general description 1.1 overview G150X1-L01 is a 15.0? tft liquid crystal display module with 2 ccfl backlight units and 20 pins lvds interface. this module supports 1024 x 768 xga mode and can display 16.2m colors. the pswg is to establish a set of displays with standard mechanical dimensions and select electrical interface requirements for an industry standard 15.0? xga lcd panel and the inverter module for backlight is not built in. 1.2 features - xga (1024 x 768 pixels) resolution - de (data enable) only mode - lvds interface with 1pixel/clock - pswg (panel standardization working group) - wide operating temperature. - rohs compliance 1.3 application -tft lcd monitor -tft lcd tv - factory application - amusement - vehicle 1.4 general specificati0ns item specification unit note active area 304.128 (h) x 228.096(v) (15.0? diagonal) mm bezel opening area 307.4(h) x 231.3(v) mm (1) driver element a-si tft active matrix - - pixel number 1024 x r.g.b x 768 pixel - pixel pitch 0.297(h) x 0.297(w) mm - pixel arrangement rgb vertical stripe - - display colors 16,194,277 color - display mode normally white - - surface treatment hard coating (3h), anti-glare ( haze 25) - - www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 5 / 27 version 2.2 1.5 mechanical specifications item min. typ. max. unit note horizontal(h) 326.0 326.5 327.0 mm vertical(v) 253.0 253.5 254.0 mm (1) module size depth(d) - - 14.35 mm (1)(2) weight - - 1100 g - note (1) please refer to the attached drawings for more information of front and back outline dimensions. note (2) the depth is without connector. +/- 0.5m m www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 6 / 27 version 2.2 2. absolute maximum ratings 2.1 absolute ratings of environment value item symbol min. max. unit note storage temperature t st -40 80 oc (0), (1) operating ambient temperature t op -30 70 oc (0), (1), (2) test item test condition note high temperature storage test 80oc, 240 hours low temperature storage test -40oc, 240 hours thermal shock storage test -40oc, 0.5hour ??? 80 j , 0.5hour; 100cycles, 1hour/cycle high temperature operati on test 70oc, 240 hours low temperature operation test -30oc, 240 hours high temperature & high humidity operation test 60oc, rh 90%, 240hours heat cycle operation test -30oc, 1hour ??? 70oc, 1hour; 50cycles, 4hour/cycle (1), (2) esd test (operation) 150pf, 330 [ , 1sec/cycle condition 1 : panel contact, ? 8kv condition 2 : panel non-contact ? 15kv (2) shock (non-operating) 50g, 11ms, half sine wave, 1 time for x, y, z direction (2), (3) vibration (non-operating) 1.5g, 10 ~ 500 hz sine wave, 1.5mm max, 30min/cycle, 1 cycles each x, y, z direction (2), (3) note (0) all test conditions are as above table. note (1) temperature and relative humidity range is shown in the figure below. (a) 90 %rh max. (ta 40 oc). (b) wet-bulb temperature should be 39 oc max. (ta > 40 oc). (c) no condensation of water. note (2) no display malfunctions. note (3) at testing vibration and shock, the fixtur e in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. note (4) temperature of panel display surface area should be 80 oc max. www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 7 / 27 version 2.2 2.2 electrical absolute ratings 2.2.1 tft lcd module value item symbol min. max. unit note power supply voltage v dd -0.3 4.0 v 2.2.2 backlight unit value item symbol min. max. unit note lamp voltage v l - 2.5k v rms (1), (2), i l = 8 ma lamp current i l - 8.5 ma rms lamp frequency f l 40 80 khz (1), (2) note (1) permanent damage to the device may occur if maximum values are exceeded. function operation should be restricted to the conditions desc ribed under normal operating conditions. note (2) specified values are for lamp (ref er to section 3.2 for further information). www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 8 / 27 version 2.2 3. electrical characteristics 3.1 tft lcd module (1) value parameter symbol min. typ. max. unit note power supply voltage v dd 3.0 3.3 3.6 v - ripple voltage v rp - - 100 mvp-p rush current i rush - - 2.0 a (2) white - 500 ma (3)a power supply current black lcc - 750 ma (3)b ?h? level v ih - - 100 mv - differential input voltage for lvds receiver threshold ?l? level v il -100 - - mv - terminating resistor r t 100 - ohm - note (1) the module should be always operated within above ranges. note (2) measurement conditions: 470 g s +3.3v gnd 0.9 v dd 0.1 v dd r1 (high to low) (control signal) +12v sw q2 c1 1uf vdd +3.3v 2sk1470 q1 2sk1475 47k r2 1k vr1 47k c2 0.01uf c3 1uf fuse (lcd module input) www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 9 / 27 version 2.2 note (3) the specified power supply current is under the conditions at v dd =3.3v, ta = 25 2 oc, dc current and f v = 60 hz, whereas a power dissipation check pattern below is displayed. active area a. white pattern active area b. black pattern www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 10 / 27 version 2.2 3.2 backlight unit ta = 25 2 oc value parameter symbol min. typ. max. unit note lamp input voltage v l 522 580 638 v rms i l = 8.0 ma lamp current i l 2 8 8.5 ma rms (1) -- -- 1400 ( 0 j ) v rms (2) lamp turn on voltage v s -- -- 1210 (25 j ) v rms (2) operating frequency f l 40 -- 80 khz (3) lamp life time l bl 50000 -- -- hrs (5) power consumption p l 4.18 4.64 5.1 w (4), i l = 8.0 ma note (1) lamp current is measur ed by utilizing a high frequency current meter as shown below: note (2) the voltage that must be larger than vs should be applied to the lamp for more than 1 second after startup. otherwise, the lamp may not be turned on normally. note (3) the lamp frequency may generate interferen ce with horizontal synchronous frequency from the display, and this may cause line flow on the display. in order to avoid interference, the lamp frequency should be detached from the horizontal sy nchronous frequency and its harmonics as far as possible. note (4) p l = i l x v l note (5) the lifetime of lamp is defined as the time wh en it continues to operate under the conditions at ta = 25 2 o c and i l =8.0ma rms until one of the following events occurs: (a) when the brightness becomes 50% of its original value. (b) when the effective ignition length becomes 80% of its original value. (effective ignition length is defined as an area that the brightness is le ss than 70% compared to the center point.) note (6) the waveform of the voltage output of inverter must be area-symmetric and the design of the inverter must have specifications for the modularized lamp. the performance of the backlight, such as lifetime or brightness, is greatly influenced by the characteristics of the dc-ac inverter for the lamp. all the parameters of an inverter s hould be carefully designed to avoid generating too much current leakage from high voltage output of the inverter. when designing or ordering the inverter please make sure that a poor lighting ca used by the mismatch of the backlight and the inverter (miss-lighting, flicker, etc.) never occu rs. if the above situation is confirmed, the module should be operated in the same manners when it is installed in your instrument. a current meter lcd module 1 inverter a current meter hv (pink/ blue) lv (white/ black) 3 1 inverter hv (pink/ blue) lv (white/ black) 3 www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 11 / 27 version 2.2 the output of the inverter must have symmetrical (negative and positive) voltage waveform and symmetrical current waveform.(unsy mmetrical ratio is less than 10%) please do not use the inverter which has unsymmetrical voltage and unsymmetrical current and spike wave. lamp frequency may produce interface with horizontal synchronous frequency and as a result this may cause beat on the display. therefore lamp frequency shall be as away possible from the horizontal synchronous frequency and from its harmonics in order to prevent interference. requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp. it shall help increase the lamp lifetime and reduce its leakage current. a. the asymmetry rate of the inverter waveform should be 10% below; b. the distortion rate of the waveform should be within ?? 2 10%; c. the ideal sine wave form shall be symmetric in positive and negative polarities 4. block diagram 4.1 tft lcd module dc power supply lvds input tft lcd panel (1024x3x768) data driver ic scan driver ic backlight unit timing controller dc/dc converter & reference voltage generator input connector (tbd) lamp connector (jst bhr-03vs-1) lvds input i p i -p * asymmetry rate: | i p ? i ?p | / i rms * 100% * distortion rate i p (or i ?p ) / i rms www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 12 / 27 version 2.2 4.2 backlight unit 5. input terminal pin assignment 5.1 tft lcd module pin no. symbol function polarity note 1 vdd power supply +3.3v(typical) 2 vdd power supply +3.3v(typical) 3 gnd ground 4 gnd ground 5 rx0- lvds differential data input negative 6 rx0+ lvds differential data input positive 7 gnd ground 8 rx1- lvds differential data input negative 9 rx1+ lvds differential data input positive 10 gnd ground 11 rx2- lvds differential data input negative 12 rx2+ lvds differential data input positive 13 gnd ground 14 rxclk- lvds differential data input negative 15 rxclk+ lvds differential data input positive 16 gnd ground 17 rx3- lvds differential data input negative 18 rx3+ lvds differential data input positive 19 gnd ground 20 nc tied to ground 1 h v ( pink ) 3 lv ( white ) 3 lv ( white ) 1 hv ( pink ) www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 13 / 27 version 2.2 (1)connector part no.: [hirose] df14h-20p-1.25h (2)matching socket part no.: [hirose] df14-20s-1.25c 5.2 backlight unit pin symbol description color 1 hv high voltage pink/ blue 3 lv ground white/ black note (1) connector part no.: bhr-03vs-1 (jst) or equivalent note (2) matching connector part no.: tbd or equivalent www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 14 / 27 version 2.2 5.3 color data input assignment the brightness of each primary color (red, green an d blue) is based on the 8-bit gray scale data input for the color. the higher the binary input the brighter the color. the table below provides the assignment of color versus data input. data signal red green blue color r7 r6 r5 r4 r3 r2 r1 r0 r7 r6 g5 g4 g3 g2 g1 g0 r7 r6 b5 b4 b3 b2 b1 b0 basic colors black red green blue cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 gray scale of red red(0) / dark red(1) red(2) : : red(252) red(252) red(252) 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of green green(0)/dark green(1) green(2) : : green(252) green(252) green(252) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of blue blue(0) / dark blue(1) blue(2) : : blue(252) blue(252) blue(252) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 note (1) 0: low level voltage, 1: high level voltage www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 15 / 27 version 2.2 6. interface timing 6.1 input signal timing specifications the input signal timing specifications are shown as the following table and timing diagram . signal item symbol min. typ. max. unit note dclk pixel clock 1/t c - 65 80 mhz - vertical total time t v 780 806 1200 t h - vertical address time t vd 768 768 768 t h - horizontal total time t h 1140 1344 1600 t c - de horizontal address time t hd 1024 1024 1024 t c - note (1) because this module is operated by de only mode, hsync and vsync input signals should be set to low logic level or ground. otherwise, this module would operate abnormally. input signal timing diagram t h t c dclk t hd t v d t v de de data www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 16 / 27 version 2.2 t/7 reserved b07 b06 g07 g06 r07 r06 de gnd gnd b05 b04 b03 b02 b01 b00 g05 g04 g03 g02 g01 g00 r05 r04 r03 r02 r01 r00 txclk out rx c k in rx in3 rx in2 rx in1 rx in0 timing diagram of lvds t rxout23 rxout26 rxout25 rxout24 rxout22 rxout12 rxout9 rxout8 rxout7 rxout6 rxout4 rxout3 rxout2 rxout1 rxout0 rxout21 rxout20 rxout19 rxout18 rxout15 rxout14 rxout13 rxout17 rxout16 rxout11 rxout10 rxout5 rxout27 www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 17 / 27 version 2.2 6.2 power on/off sequence timing specifications: 0.5 < t1 ?? 10 msec 0 < t2 ?? 50 msec 0 < t3 ?? 50 msec t4 ? 500 msec t5 ? 200 msec t6 ? 200 msec note (1) please avoid floating state of interface signal at invalid period. note (2) when the interface signal is invalid, be sure to pull down the power supply of lcd v dd to 0 v. note (3) the backlight inverter power must be turned on after the power supply for the logic and the interface signal is valid. the backlight inverter power must be turned off before the power supply for the logic and the interface signal is invalid. - power supply for lcd, v dd - interface signal (lvds signal of transmitter), v i - power for lamp restart power on power off 0v 0v 10% t6 t5 t4 t3 t2 t1 10% 90% 10% 90% valid data on off off www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 18 / 27 version 2.2 7. optical characteristics 7.1 test conditions item symbol value unit ambient temperature ta 25 2 o c ambient humidity ha 50 10 %rh supply voltage v dd 3.3 v input signal according to typical val ue in "3. electrical characteristics" inverter current i l 8.0 ma inverter operating frequency f l 51 khz inverter sumida h05 5052 the measurement methods of opt ical characteristics are shown in section 7.2. the following items should be measured under the test conditions describ ed in section 7.1 and stable environment shown in note (4). 7.2 optical specifications the relative measurement methods of optical characteristics are shown in 7.2. the following items should be measured under the te st conditions described in 7.1 and stable environment shown in note (6). item symbol condition min. typ. max. unit note rx 0.613 red ry 0.344 gx 0.302 green gy 0.567 bx 0.144 blue by 0.102 wx 0.313 color chromaticity white wy typ - 0.03 0.329 typ+ 0.03 (1), (6) center luminance of white l c 400 450 cd/m 2 (4), (6) contrast ratio cr x =0 , y =0 cs-1000t 480 700 - (2), (6) t r - 8 13 (3) response time t f x =0 , y =0 - 17 22 ms white variation w - 1.25 1.4 - (6), (7) cross talk ct x =0 , y =0 bm-5a --- --- 5.0 % (5), (6) x + 70 80 horizontal x - 70 80 y + 70 80 viewing angle vertical y - cr ? 10 bm-5a 70 80 deg. (1),(6), (8) www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 19 / 27 version 2.2 note (1) definition of viewing angle ( x, y): note (2) definition of contrast ratio (cr): the contrast ratio can be calcul ated by the following expression. contrast ratio (cr) = l255 / l0 l255: luminance of gray level 255 l 0: luminance of gray level 0 cr = cr (1) cr (x) is corresponding to the contrast ratio of the point x at figure in note (5). note (3) definition of response time (t r , t f ): 12 o?clock direction y+ = 90o 6 o?clock y- = 90o x- x + y- y + x- y+ y- x+ normal x = y = 0o x+ = 90o x- = 90o 100% 90% 10% 0% gray level 255 gray level 0 gray level 255 time t f optical response t r 66.67m 66.67ms www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 20 / 27 version 2.2 note (4) definition of luminance of white (l c ): measure the luminance of gray level 255 at center point l c = l (5) l (x) is corresponding to the luminance of the point x at figure in note (7). note (5) definition of cross talk (ct): ct = | y b ? y a | / y a 100 (%) where: y a = luminance of measured location without gray level 0 pattern (cd/m 2 ) y b = luminance of measured location with gray level 0 pattern (cd/m 2 ) note (6) measurement setup: the lcd module should be stabilized at giv en temperature for 20 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 20 minutes in a windless room. a ctive area y a, u (d/2,w/8) y a, r (7d/8,w/2) y a, d (d/2,7w/8) y a, l (d/8,w/2) (0, 0) (d,w) gray 128 a ctive area gray 0 (d/4,w/4) (3d/4,3w/4) (0, 0) y b, u (d/2,w/8) y b, r (7d/8,w/2) y b, d (d/2,7w/8) y b, l (d/8,w/2) (d,w) gra y 128 bm-5a ca-1000t field of view = 2o 500 mm lcd module lcd panel center of the screen light shield room (ambient luminance < 2 lux) www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 21 / 27 version 2.2 note (7) definition of luminance measured points: measure the luminance of gray level 255 at point l(1) definition of white variation ( w): measure the luminance of gray level 255 at 9 points w = note (8) tn type has gray scale inversion occurs at y- = 40o d w active area vertical line horizontal line : test point x=1 to 13 1 23 4 5 d/4 d/2 3d/4 w/4 w/2 3w/4 x d/10 9w/10 w/10 9d/10 6 7 8 11 12 13 9 10 maximum [l (1), l (6), l (7), l (8), l (9), l (10), l (11), l (12), l (13)] minimum [l (1), l (6), l (7), l (8), l (9), l (10), l (11), l (12), l (13)] www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 22 / 27 version 2.2 8. precautions 8.1 handling precautions (1) the module should be assembled into the system fi rmly by using every mounting hole. be careful not to twist or bend the module. (2) while assembling or installing modules, it can only be in the clean area. the dust and oil may cause electrical short or damage the polarizer. (3) use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and assembly process. (4) do not press or scratch the surface harder than a hb pencil lead on the panel because the polarizer is very soft and easily scratched. (5) if the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. do not use ketone type materials (ex. acetone), ethyl alcohol, toluene, ethyl acid or methyl chloride. it might permanently damage the polarizer due to chemical reaction. (6) wipe off water droplets or oil immediately. staining and discoloration may occur if they left on panel for a long time. (7) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. in case of contacting with hands, legs or clothes , it must be washed away thoroughly with soap. (8) protect the module from static electricity, it may cause damage to the c-mos gate array ic. (9) do not disassemble the module. (10) do not pull or fold the lamp wire. (11) pins of i/f connector should not be touched directly with bare hands. 8.2 storage precautions (1) high temperature or humidity may reduce the perfo rmance of module. please store lcd module within the specified storage conditions. (2) it is dangerous that moisture come into or co ntacted the lcd module, because the moisture may damage lcd module when it is operating. (3) it may reduce the display quality if the ambient te mperature is lower than 10 oc. for example, the response time will become slowly, and the starting voltage of lamp will be higher than the room temperature. 8.3 operation precautions (1) do not pull the i/f connector in or out while the module is operating. (2) always follow the correct power on/off sequence when lcd module is connecting and operating. this can prevent the cmos lsi chips from damage during latch-up. the startup voltage of backlight is approximately 1000 volt s. it may cause electrical shock while assembling with inverter. do not disassemble the module or insert anything into the backlight unit. www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 23 / 27 version 2.2 9. packaging 9.1 packing specifications (1) 10 lcd modules / 1 box (2) box dimensions : 511(l) x 420(w) x 360(h) mm (3) weight : approximately 12.7kg ( 10 modules per box) figures 9-1 www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 24 / 27 version 2.2 9.2 packing method figures 9-2 www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: 14066727 issued date: feb. 8, 2007 model no.: G150X1-L01 approval 25 / 27 version 2.2 10 . definition of labels 10.1 cmo module label the barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation. (a) model name: g150x1 ?l01 (b) revision: rev. xx, for example: c1, c2 ?etc. (c) serial id: x x x x x x x y m d l n n n n serial id includes the information as below: (a) manufactured date: year: 1~9, for 2000~2009 month: 1~9, a~c, for jan. ~ dec. day: 1~9, a~y, for 1 st to 31 st , exclude i and o (b) revision code: cover all the change (c) color filter: 0 ->cmo, 2 -> toppan (d) serial no.: manufacturing sequence of product (e) product line: 1 -> line1, 2 -> line 2, ?etc. product line year, month, date cmo internal use color filter revision cmo internal use serial no. chi mei optoelectronics g150x1 -l01 rev. xx x x x x x x x y m d l n n n n made in taiwan e207943 www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of G150X1-L01

	To Download G150X1-L01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .